Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Full-view glass
Chamberlain openers
Before
After
Before
After
Before
AfterFast, Reliable Garage Door Installation Across Cumming
Garage door installation in Cumming typically runs $700-$2,200 for a complete new door, and most replacements in Forsyth County subdivisions take a single day once the door is on hand. We’re Servo Garage Doors Lawrenceville, and we’ve been working Cumming’s master-planned communities long enough to know which builder installed what, in which neighborhood, in which decade. That matters when the door you’re replacing was put in by a production builder in 2007 and the parts on it were never meant to last past 2025. If your door has reached that point, call (470) 202-3917 and we’ll give you a written price before any work starts.
Why Servo Garage Doors Lawrenceville Is Cumming’s Preferred Garage Door Installation Company
Cumming occupies a strange position in metro Atlanta’s garage door market. The housing stock is unusually uniform: large two-story homes in master-planned communities like Windermere and Polo Golf & Country Club, built between 2000 and 2015, most with attached two- or three-car garages and heavy carriage-style doors. That uniformity means the failure patterns repeat. When we replace a door on one street in Windermere, we usually know exactly what the next street over is dealing with, because the same regional builder installed the same door and the same opener on nearly every house in that phase of the subdivision.
That’s why we don’t have to guess on a Cumming job. We show up already familiar with the door, the spring configuration, and the likely points of failure. Marcus Deller, who leads our team, built our service around a documentation-first approach: the technician photographs what’s failed before anything gets quoted, and you receive that photo record when the job is done. It’s Clause 4 of The Haven Standard, and it’s how we’ve done every job since 2015. We’re independently owned and operated under that standard, not a franchise, and the license number belongs to the local business, not a distant corporate office.
Our Garage Door Installation Services in Cumming
New Door Installation
Most Cumming homeowners replace a garage door because the original one finally gave out, not because they were shopping for an upgrade. A complete new door installation in Cumming runs $700-$2,200 depending on size, material, and insulation. We measure the opening, check the framing and track condition, and quote a flat price with a written scope before any work happens. No surprises at the end.
Single Car Door
Single-car doors in Cumming are common on older ranches and on the third bay of three-car garages in newer subdivisions. These doors are lighter, which means the springs last longer, but the openers are often undersized for the weight. We’ll tell you if your existing opener can handle a new door or if you’re better off pairing the installation with a new unit. The price range stays within the same $700-$2,200 window depending on the door you pick.
Double Car Door
Double car doors are the workhorse of Cumming’s 2000s-era subdivisions. A 16×7 or 18×7 carriage-style door needs a properly calibrated torsion spring system. When we install a double door in Windermere or Polo Golf, we size the springs for the actual door weight, not the builder’s original spec, which often used a single undersized spring. That’s one reason so many of those original doors fail early. A double door replacement in Cumming with high-cycle springs is the most common job we do in this category.
Custom Garage Door
Some Cumming homeowners want something that doesn’t look like every other door on the street. Custom doors, whether steel or wood, need careful measurement because Forsyth County’s red clay can shift slabs and leave openings slightly out of square. We measure the opening in three places before ordering anything, and we account for the track alignment issues that settled slabs cause. Custom work runs toward the upper end of the $700-$2,200 range, and we’ll give you the exact number in writing before you commit.
BeforeAfterTrusted Brands We Service in Cumming
We install and service doors and openers from LiftMaster, Chamberlain, Clopay, and Wayne Dalton, and we carry the common parts for those brands on our vans when we’re working in Cumming. The 2000s-era subdivisions here are full of Wayne Dalton carriage doors and Genie screw-drive openers, so we stock the springs, cables, and opener components that those specific setups need. That means fewer return trips and faster installation when a part fails mid-job. If your existing door is one of those brands, we can usually match the replacement to the hardware you already have or explain the upgrade trade-offs in plain terms.
Common Garage Door Installation Problems We See in Cumming Homes
- Torsion springs reaching end of life simultaneously across a neighborhood. The original springs in 2000s-era Windermere and Polo Golf homes were typically rated for 10,000 cycles. In a house where the door cycles four or five times a day, that’s roughly 15 to 20 years. Those springs are failing now, in clusters.
- Undersized single-spring setups on heavy carriage doors. Builders often installed one spring where two were needed to save cost. The result is a spring that snaps early, which puts massive strain on the opener gears and the photo-eye sensor brackets.
- Slab settlement from Forsyth County red clay. Seasonal moisture changes cause the clay under garage slabs to heave and settle. The floor goes slightly out of level, the tracks bind, and the rollers start chewing up the track. A door installation is the right time to correct the track alignment.
- Why are so many garage doors failing at once in Cumming’s Windermere and Polo Golf communities? Because the homes were built in the same decade by the same builders using the same hardware, and that hardware has all reached its failure window at the same time. This is described in more detail in the FAQ below.
Pricing for Garage Door Installation in Cumming, GA
Here’s what you can expect for garage door installation in Cumming. These are the line-item ranges we quote from, presented the same way we’d put them in a written estimate:
| Service | Typical Range in Cumming |
|---|---|
| New Door Installation | $700-$2,200 |
| Track Realignment | $120-$240 |
| Roller Replacement | $110-$220 |
The final price depends on the door size, material, insulation level, and whether the existing track system can be reused. What doesn’t change is how we price it: flat, written, and agreed before any work begins. That’s Clause 1 of The Haven Standard. Call (470) 202-3917 for a written estimate on your specific door.
We Also Serve Cities Near Cumming
Our crews work throughout Cumming and the surrounding Forsyth County area, with regular routes through Alpharetta, Flowery Branch, Duluth, and Suwanee. If you’re on the edge of Cumming or in one of the nearby communities, we can usually schedule you within the same window and bring the same parts-stocked van. The same written pricing applies no matter which of these cities you’re in.
Serving Cumming, GA - Our Local Coverage Area
We’re based in the Cumming area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Installation in Cumming
Because those subdivisions were built in a compressed window between roughly 2000 and 2015, and nearly every home got the same builder-grade carriage door and the same single spring configuration. A spring rated for 10,000 cycles lasts 15 to 20 years in normal use. That clock has run out across hundreds of adjacent homes at the same time, which is why we’re seeing a concentrated replacement wave there. Call (470) 202-3917 and we’ll tell you whether your door is part of that wave or has life left in it.
Yes, if your door is a heavy 18×7 carriage model, a high-cycle dual-spring system is almost always the right call. The original single-spring setups in Cumming’s 2000s-era homes were undersized for the door weight, which is why they snap early. A high-cycle spring set rated for 25,000 to 50,000 cycles costs more up front but outlasts the original by a wide margin. We’ll quote both options and let you decide.
In most cases, yes. Track realignment in Cumming runs $120-$240, and it’s often done as part of a door installation rather than as a standalone job. If the slab movement is severe, the door panels may have been damaged by binding, but the tracks themselves can usually be re-squared with shims and bracket adjustment. We’ll photograph what’s out of alignment and show you before quoting the fix.
You cannot install a new opener head on an old Genie screw-drive rail unless the rail is explicitly compatible, and most 2005-era rails are not. The screw-drive carriage and the motor head are engineered as a matched set. You’re better off replacing the entire opener, which in Cumming runs $250-$550 for the unit and installation. We’ll explain the compatibility issue in plain terms when we’re there.
For most Cumming homes with an original one-piece or early sectional door, replacement is the better financial call. A new torsion spring on a legacy door runs $180-$340, but the door itself is likely near the end of its service life, and the panels, hinges, and track will keep failing piecemeal. A new door at $700-$2,200 gives you a clean 15-to-20-year cycle with current hardware and proper spring sizing. We’ll give you a written comparison of both options before you spend anything.
The Local Failure Pattern We Know Before We Arrive
Cumming’s housing boom created something you don’t see in older cities: entire streets where every house has the same door, the same opener, and the same spring, all aging on the same clock. Windermere is the clearest example. The builders who developed those phases in the mid-2000s used Wayne Dalton carriage doors with a single torsion spring and a Genie screw-drive opener. The springs were rated for 10,000 cycles. The openers were matched to a lighter door than what actually got installed. The result, two decades later, is a street-level pattern: one house’s spring snaps, then the next, then the next. A technician who has worked one street already knows the part numbers and failure sequence for the entire subdivision. That’s a hyper-local efficiency specific to Forsyth County’s master-planned build-out, and it’s why our vans carry extra Wayne Dalton springs and Genie opener components when we’re working in Cumming.
A Recent Job in Windermere
Last week we replaced a 16×7 Wayne Dalton carriage door in Windermere where the original single torsion spring had snapped at roughly 18,000 cycles. The Genie screw-drive opener on the same home was straining against a door that weighed nearly 200 pounds, and the tracks had been pulled out of square by the slab settling on Forsyth County red clay. We installed a high-cycle dual-spring system, rehung the opener rail, and realigned the tracks; the door now balances perfectly by hand. The homeowner got a photo record of every step, and a written scope before the job started.
Call for a Written Price Before Any Work Starts
If you’re in Cumming and your garage door is struggling, call (470) 202-3917. We’ll schedule a visit, measure your opening, check the spring and track condition, and give you a flat written price with a written scope before anything gets ordered or installed. That’s how we’ve done 18,000-plus garage doors since 2015, and it’s the only way we work. Ask for a Free Second Opinion if you have a written estimate from another company. Bring the paperwork and we’ll tell you honestly whether it’s a fair price.
Written by Marcus Deller, Owner at Servo Garage Doors Lawrenceville, serving Cumming and Forsyth County.
Garage Door Installation in Nearby Areas
